Java Flow control

Java Flow control

In this tutorial we are going to discuss about Java Flow control. Flow control describes the order in which the statements will be executed at run time.

Java Flow control
Selection Statements
1. if_else

Syntax

if(a) {
    Action if a is true
} else {
   Action if a is false 
}
  • The argument to the if statement should be boolean type. If we are providing any other type we will get compile error.
  • Curly braces { } are optional and without curly braces we can take any one statement and which should not be declarative statement
if(true) 
   System.out.println("Hai this is Ashok"); // Hai this is Ashok

if(true) 
   int x = 10; // Compile time error

if(true) {
    int x = 10; // Fine
}

if(true); // Fine
2. Switch statement

If several options are possible then it is never recommended to use if-else, we should go for switch statement.

Syntax

switch(a) {
case 1:
         Action 1;
case 2:
         Action 2;
      .
      .
      .
default:
         default Action;
}
  • Curly braces are mandatory
  • Both case and default are optional inside a switch
int x = 10;
switch(x) {

}

With in the switch, every statement should be under some case or default. Independent statements are not valid

int x = 10;
switch(x) {
   System.out.println("Hi this is Ashok"); 
}
C.E: case, default or '}' expected

Until 1.4v the allowed data types for switch argument are

  1. byte
  2. short
  3. int
  4. char
  • But from 1.5V on wards in addition these corresponding wrapper classes (Byte, Short, Character, Integer) and enum types are allowed and 1.7V on wards String type is allowed
  • If we are passing any other type we will get compile time error.
  • Every case label should be with in the range of switch argument type otherwise we will get compile time error.
byte b = 10;
switch(b) {
   case 10:
           System.out.println("10");
   case 100:
           System.out.println("100");
   case 1000:                         // C.E: Possible loss of precision found: int required : byte [byte range is – 128 to 127]
           System.out.println("1000"); 
}

byte b = 10;
switch(b + 1) { // int type
   case 10:
           System.out.println("10");
   case 100:
           System.out.println("100");
   case 1000:                         // Fine
           System.out.println("1000"); 
}

Every case label should be valid compile time constant, if we are taking variable as case label then we will get compile time error.

int a = 10;
int b = 20;
switch(b) {
   case 10:
        System.out.println("10");
   case y:                  // C.E: Constant expression required
        System.out.println("20"); 
}

Note

  • If we declared y as final then we won’t get any compile time error
  • Expressions are allowed for both switch argument and case label but case label should be constant expression.
int a = 10;
switch(a+1) {
   case 10:
           System.out.println("10");
   case 10+1:                         
           System.out.println("11"); 
}

Duplicate case labels are not allowed

int a = 10;
switch(a) {
   case 97:
           System.out.println("97");
   case 98:                         
           System.out.println("98"); 
   case 'a':                         // C.E: Duplicate case label
           System.out.println("a"); 
}
Fall Through inside switch 

Within the switch statement if any case is matched from that case onwards all statements will be executed until break statement or end of the switch. This is called fall-through inside switch.

switch(x) {
   case 0:
         System.out.println("0");
   case 1:
         System.out.println("1");
         break;
   case 2:
         System.out.println("2");
   default:
         System.out.println("default");
}

Output

If x = 0 -- 0, 1
If x = 1 -- 1
If x = 2 -- 2, default
If x = 3 -- default

Fall through inside switch is useful to define some common action for several cases.

switch(x) {
   case 3:
   case 4:         
   case 5:
       System.out.println("Summer");
       break;
   case 6:
   case 7:
   case 8:
   case 9: 
       System.out.println("Rainy");
       break;
   case 10:
   case 11:
   case 12: 
   case 1:
   case 2: 
       System.out.println("Winter");
       break;      
}
Default Case
  • We can use default case to define default action
  • This case will be executed iff no other case is matched
  • We can take default case any where within the switch but it is convention to take as last case.

E.g

switch(a) {
   default:
        System.out.println("default");
   case 0:                         
        System.out.println("0"); 
        break;
   case 1:                         
        System.out.println("1"); 
   case 2:                         
        System.out.println("2"); 
}

Output

If x = 0 -- 0
If x = 1 -- 1, 2
If x = 2 -- 2
If x = 3 -- default
Iterative Statements
1. while

If we don’t know the number of iterations in advance then the best suitable loop is while loop.

while(rs.next()) { // ResultSet
   ............
   ............
}

while(itr.hasNext()) { // Iterator
   ............
   ............
}

Syntax

while(boolean_value) {
   Some Action
}

The argument to the while loop should be boolean type. If we are trying to use any other type then we will get compile time error.

while(1) { // C.E: Incompatible types found:int required: boolean 
   System.out.println("Hai this is while loop");
}

Curly braces { } are optional and without curly braces we can take any one statement and which should not be declarative statement.

while(true) 
System.out.println("Hai this is Ashok"); //Fine

while(true) 
int x = 10; // Compile time error

while(true) {
    int x = 10; // Fine
}

while(true); // Fine
while(true) {
    System.out.println("Hi");
}
System.out.println("Hello"); // C.E: Unreachable code

while(false) {
    System.out.println("Hi");
}
System.out.println("Hello"); // C.E: Unreachable code
2. do-while

If we want to execute loop body at least once then we should go for do-while loop

Syntax

do {
   Some Action
} while(boolean_value); // Here ; is mandatory 

Curly braces { } are optional and without curly braces we can take any one statement between do and while and which should not be declarative statement.

do 
System.out.println("Hai this is Ashok"); //Fine
while(true);

do; // ; is a valid java statement
while(true);

do
int x = 10; // C.E
while(true);

do{
int x = 10; 
}while(true); // Fine

do
while(true); //C.E (Compulsory one statement declare or take.)
3. For loop
  • For loop is the most commonly used loop in java
  • If we know the number of iterations in advance then for loop is the best choice
for (initialization; condition; increment/decrement) {
    statement(s) //block of statements
}

Curly braces { } are optional and without curly braces we can take any one statement and which should not be declarative statement.

for(int i=0;true;i++)
System.out.println("Hai"):

for(int i=0;true;i++);

for(int i=0;true;i++)
int x=10; // C.E
Initialization section
  • This will be executed only once
  • Usually we are declaring and performing initialization for the variables in this section
  • Here we can declare multiple variables of the same type but different datatype variables we can’t declare
int i = 0, j = 0; // Fine
int i = 0, byte b = 0; // Error
int i = 0, int j = 0; // Error

In the initialization section we can take any valid java statement including System.out.println() also.

int i=0;
for(System.out.println("Hello");i<3;i++) {
   System.out.println("Hai");
}

Output

Hello
Hi
Hi
Hi
Conditional Expression
  • Here we can take any java expression but the result should be boolean type.
  • It is optional and if we are not specifying then compiler will always places true.
Increment and decrement section

We can take any valid java statement including System.out.println() also.

int i=0;
for(System.out.println("Hello");i<3;System.out.println("Ashok")) {
   i++;
}

Output

Hello
Ashok
Ashok
Ashok
  • All 3 parts of the for loop are independent of each other.
  • All 3 parts of for loop are optional
for( ; ; ); // Represent infinite loop
4. for-each() loop (Enhanced for loop)
  • Introduced in 1.5V
  • This is the most convenient loop to retrieve the elements of arrays and collections

E.g:

1. Print elements of single dimensional array by using general and enhanced for loops

int[] a = {10,20,30,40,50};
for-loop
for(int i=0;i<a.length;i++) {
   System.out.println(a[i]);
}
for-each
for(int x:a) {
   System.out.println(a[i]);
}

2. Print elements of 2-dimensional int array by using general and enhanced for loops.

int[][] a = {{10,20,30},{40,50}};
for-loop
for(int i=0;i<a.length;i++) {
   for(int j=0;j<a[i].length;j++) {
      System.out.println(a[i][j]);
   }
}
for-each
for(int[] x:a) {
   for(int y:x) {
      System.out.println(y);
   }
}

Even though for-each loop is more convenient to use, but it has the following limitations.

  1. It is not a general purpose loop
  2. It is applicable only for arrays and collection
  3. By using for-each loop we should retrieve all values of arrays and collection and can’t be used to retrieved a particular set of values
Transfer statements
1. break

We can use break statement in the following cases

  • Within the switch to stop fall through
  • Inside loops to break the loop execution based on some condition
  • Inside labelled blocks to break that block execution based on some condition

If we are break statement other than above cases then we will get compile time error.

for(int i = 0;i<=10; i++) {
    if(i==5) 
         break;
    System.out.println(i);
}
2. continue 

We can use continue statement to skip current iteration and continue for the next iteration inside loops

for(int i = 0;i<=10; i++) {
    if(i%2==0) 
         continue;
    System.out.println(i);
}

If we are using continue outside of any loops we will get compile time error.

Labelled break and continue statements

In the case of nested loops to break and continue a particular loop we should go for labeled break and continue statements.

l1:
for(int i=0;i<3;i++) { 
   for(int j=0;j<=3;j++) {
      if(i == j)
         break;
      System.out.println(i+"  "+j);
   }
}

Output

break
1  0
2  0
2  1

break l1<
No output

continue
0  1
0  2
1  0
1  2
2  0
2  1

continue l1
1  0
2  0
2  1

Note 

Compiler will check for unreachable statements only in the case of loops but not in if-else.

That’s all about Java Flow control. If you have any queries or feedback, please write us at contact@waytoeasylearn.com. Enjoy learning, Enjoy Java.!!

Java Flow control
Scroll to top